Recent content by ChptMfg

Looking for a quote on 10 to 15 of these hose hangers. 316 Stainless Steel

Lead out with a saw is fine that is how we have been doing it, The runout tolerance is in relation to the bores on each end, if you can hold the 0.120 diameter that would be good as well. This is a drive collet for a high rpm grinder, the unit revs to 20,000 so any misalignment makes the...

Small Brass Collets - Screw Machine would be best but lathe would work. Looking for quote on 60, 120, 180. 360 Brass will be fine. Out of tolerance parts will not be purchased. Thanks, Jonathan Harp jonathan@chptmfg.com

Could you please quote the following 2 parts. They are mating. The groove on the end of the male part is for an o-ring. The pair of grooves on each part are for e-clips. No out of tolerance parts excepted. Thanks for taking a look.

I reviewed about 10 quotes, 6 from rfqwork and 4 from shops I use regularly. You should never be afraid to quote a part, let your reputation/quality speak for itself. And allow the customer to figure out what he wants to do. Interact scared me, I have been burned, as a matter of fact I...

Job has been awarded I have awarded the job, so no more quotes are required. To all interested parties the parts were awarded at: Barrel : $4.65 Riser : $4.85 The average of the quotes was: Barrel : $5.76 Riser : $6.73 I chose a company that has done some work for me in the...

Questions To answer a few questions. ---I don't think this will be a repeat job. ---The drill point on the barrel was drawn at 118 deg., just looking for about 3/8" engagement, so it you want to use 135 deg or other you may. Jonathan

Email I forgot to add my email for easier communication. jonathan@chptmfg.com Thanks

Please quote material, manufacture, delivery to 19947. Qty. 100each. Materail: 316L, (Sorry, the print says 316) Thanks, Jonathan Harp CHPT MFG. Inc. Georgetown, DE

Quote Awarded Thanks, Jonathan

Addition OD needs good turned finish, something like a 100 or better would be fine.

Answers to some Credit/Bank/Business References-No Problem I do not need inspection reports, I am going to inspect the parts when the arrive. Delivery date is what ever you quote, would like to see it less than 6 weeks. I am only looking for 50 parts at the time.

Hello, Qty:100 Materail: 304 Stainless Steel Parts Clean, Deburred, Inspected. No out of tolerance parts accepted. No late parts accepted. NO DOWN PAYMENTS! Thanks, Jonathan

Hello, Qty:50 Material: 316 Stainless Steel Parts to be Cleaned, Deburred, and Inspected. No out of Tolerance parts accepted. No late parts accepted. NO DOWN PAYMENTS. Thanks for Quoting, Jonathan

Hello, Qty: 50 Materail: 316 Stainless Steel Please note the two 0.094 half moons in the bottom of the one hole, they can really eat up some end mills if not careful, Also all holes need to be drilled using a 135 deg. drill. Parts are to be de-burred, cleaned, and inspected before...