Request For Quote- extraction tool - ball lever

Contact information. Phone number and e-mail at least.
Brian Ostosh 619-200-7203 bostosh0@cox.net

Part title.
extraction tool - ball lever
http://members.cox.net/bostosh1/STK Extraction tool Print .pdf

Material to be used.
Drill blank or drill rod, C.R.S.
no heat treat needed

Who is supplying the material?
Material not provided

Preferred manufacturing method.
Mill, Turn, Surface Grinder

Quantities to quote.
Two or three, more depends on cost

Part drawing.
I.G.E.S. solid model file provided. Metric units
Three different formats .STP and .SAT (both tested)
http://members.cox.net/bostosh1/STK Extraction Tool.igshttp://members.cox.net/bostosh1/STK Extraction Tool.igs
http://members.cox.net/bostosh1/STK Extraction tool.sat
http://members.cox.net/bostosh1/STK Extraction tool.stp
File available in (most) any format.
The design is not cast in stone,
Radii's inside trough mostly optional
Needs a 90deg inside corner at biz end
If you can do it with a Dremel OK
Length 6" Knurled handle optional, tack or braise
changes for manufacturing welcome.
this is just a tool to grab around the button head and
pull an assembly held in with O-rings out of a hole.
Might get used 10-20 times to rebuild air suspension valves
Does not need to be a "Work of Art"


Tolerances.
.002" where puller precision counts. otherwise .010"

Surface finish.
As machined, 60-80 grit spun on lathe

Edge finish.
Break edges lightly, no burrs

Cleanliness.
Wash and WD-40 rustproofing

Target price.
$75-$120? Just guessing total

RFQ award date.
7-15-2009

Delivery time line.
2-weeks max

Quality control.
None, it just must fit

Need to rethink expected price

I am not doubting your intentions here- just to be clear.
I feel that you are expecting a VERY low price if you want a quality part.
Just saying.

Brad

Can you post a DXF or PDF file, with my FREE iges viewer I can only see a 3d rendering with no dimensions, with the above named files everyone can see them.

puller

Hi. Yes a PDF .file please
Thank;s jim
dry lake machine

A Simple Print Please

I concur.
A print in PDF, .bmp, or .jpg format with the critical dimensions noted would expedite quoting for those of us without that expensive 3D technology.

Quotation for extraction tool - ball lever

Email sent with quotation for 1, 2 & 3 assemblies of your extraction tool - ball lever, consisting of 1 ea of STK Extraction tool 1, STK Extraction tool 2, STK Extraction tool 3, manufactured from either CRS, W-1 drill rod or 300 series CRES, (depending what I happen to have in stock). All other specifications as per RFQ.

Best Regards,
Ray F. Straub
Accurate Engineering Services

Quote sent

Email sent with quote and redesign