[CLOSED] Machined Brass Parts for Prototype

Status
Not open for further replies.
J

Josh M

New Member
Hello,

I'm looking to get a quote on 11 parts made from brass for a prototype. 10 of them will be machined (mostly turned), 1 bent sheet metal. Material quote required. The parts must be finished and shipped by July 10th.


I've attached drawings here, but I can also provide STEP files if necessary.

Cylinder_CordSide qty: 1
Cylinder_KnobSide qty: 1
EndCap qty: 4
KnobRod qty: 1
Knob qty: 1
O-ring holder_CordSide qty:1
O-ring holder_KnobSide qty:1
Spacer (sheet metal) qty: 2
Threaded Pill qty: 2
Tube with Slot qty: 1
Tube qty: 3
 

Attachments

  • Proto_DrawingSet_20160622.pdf
    199.7 KB · Views: 144
E

EFS Enterprises

Member
Hi Josh,
Please send STEP files to dennis@efsenterprises.com

Thanks,
Dennis Shatto
EFS Enterprises Company
3855 24th Avenue
Forest Grove, OR 97116
Ph. (503) 359-9200
Fax (503) 359-9400
"Machining quality parts is our way of life"
dennis@efsenterprises.com
www.efsenterprises.com


Josh M said:
Hello,

I'm looking to get a quote on 11 parts made from brass for a prototype. 10 of them will be machined (mostly turned), 1 bent sheet metal. Material quote required. The parts must be finished and shipped by July 10th.


I've attached drawings here, but I can also provide STEP files if necessary.

Cylinder_CordSide qty: 1
Cylinder_KnobSide qty: 1
EndCap qty: 4
KnobRod qty: 1
Knob qty: 1
O-ring holder_CordSide qty:1
O-ring holder_KnobSide qty:1
Spacer (sheet metal) qty: 2
Threaded Pill qty: 2
Tube with Slot qty: 1
Tube qty: 3
Click to expand...
 
protechmachining

protechmachining

New Member
Josh M said:
Hello,

I'm looking to get a quote on 11 parts made from brass for a prototype. 10 of them will be machined (mostly turned), 1 bent sheet metal. Material quote required. The parts must be finished and shipped by July 10th.


I've attached drawings here, but I can also provide STEP files if necessary.

Cylinder_CordSide qty: 1
Cylinder_KnobSide qty: 1
EndCap qty: 4
KnobRod qty: 1
Knob qty: 1
O-ring holder_CordSide qty:1
O-ring holder_KnobSide qty:1
Spacer (sheet metal) qty: 2
Threaded Pill qty: 2
Tube with Slot qty: 1
Tube qty: 3
Click to expand...
I WOULD BE HAPPY TO QUOTE THIS FOR YOU. CAN YOU PLEASE SEND THE STEP FILES TO ME AT rbutterfield@protechmachining.net thank you
 
C

Chris Oliver

New Member
Josh M said:
Hello,

I'm looking to get a quote on 11 parts made from brass for a prototype. 10 of them will be machined (mostly turned), 1 bent sheet metal. Material quote required. The parts must be finished and shipped by July 10th.


I've attached drawings here, but I can also provide STEP files if necessary.

Cylinder_CordSide qty: 1
Cylinder_KnobSide qty: 1
EndCap qty: 4
KnobRod qty: 1
Knob qty: 1
O-ring holder_CordSide qty:1
O-ring holder_KnobSide qty:1
Spacer (sheet metal) qty: 2
Threaded Pill qty: 2
Tube with Slot qty: 1
Tube qty: 3
Click to expand...
I would like to quote this. Where are you located and how can I get in touch with you?
 
E

Eldinzek

Do it right
Josh M said:
Hello,

I'm looking to get a quote on 11 parts made from brass for a prototype. 10 of them will be machined (mostly turned), 1 bent sheet metal. Material quote required. The parts must be finished and shipped by July 10th.


I've attached drawings here, but I can also provide STEP files if necessary.

Cylinder_CordSide qty: 1
Cylinder_KnobSide qty: 1
EndCap qty: 4
KnobRod qty: 1
Knob qty: 1
O-ring holder_CordSide qty:1
O-ring holder_KnobSide qty:1
Spacer (sheet metal) qty: 2
Threaded Pill qty: 2
Tube with Slot qty: 1
Tube qty: 3
Click to expand...



Hi Josh,

Do you have 3D prints?
 
Larry Keller

Larry Keller

New Member
Josh M said:
Hello,

I'm looking to get a quote on 11 parts made from brass for a prototype. 10 of them will be machined (mostly turned), 1 bent sheet metal. Material quote required. The parts must be finished and shipped by July 10th.


I've attached drawings here, but I can also provide STEP files if necessary.

Cylinder_CordSide qty: 1
Cylinder_KnobSide qty: 1
EndCap qty: 4
KnobRod qty: 1
Knob qty: 1
O-ring holder_CordSide qty:1
O-ring holder_KnobSide qty:1
Spacer (sheet metal) qty: 2
Threaded Pill qty: 2
Tube with Slot qty: 1
Tube qty: 3
Click to expand...
Hello I'm Larry keller from school of Hard knocks, we need work in our school to help train vets! Shk-us.com
 
H

Hanz MFG

New Member
Hanz Manufacturing is family owned company located in Guangzhou, China. We specialize in CNC machining and sheet metal fabrication. We are pleased to quote your project. Please email your drawings or 3d CAD files to our US sales Manager Johnson(Johnson@hanzmanufacturing.com) or call him at 352-283-5765.

To learn more about our capability, please visit our website: www.hanzmanufacturing.com

Thanks,

Stephen
 
Status
Not open for further replies.
Top