Prototype Needed Simple 180Degree Bent Tube needed 7/8" OD

[GisMo]

I need qty:1 - 1"OD Mild Steel or Chromoly bent 180degrees with about 5" extra on each end. The Center Line Radius (CLR) must be 4". or 8" diameter on the centerline. A Simple Hoop. Wall thickness .065"/ ".083 close. Tube Type, DOM or ERW are sufficient. Prefer DOM.

Thanks

If possible, I'l like to discuss some extras or some other bends incorporated.

 

[RPMINC]

What wall thickness?

 

[GisMo]

.065 or .083. If you got some extra material laying around your shop let me know

 

[corfabrication]

I have a 1"x3.5clr die set,if you are open to the slight change in bend radius
Ron

 

[NFission]

I can produce your part accurately, and on time . I have 24yrs. Experience In tube fabrication . Can the part be torch bent or does it have to maintain the original steel finish? Please e-mail me for an accurate quote.

Thank you.

Nfission @gmail.com for all your tube fabrication needs.

 

[NFission]

My e-mail is Nfissioncn@gmail.com.

 

[NFission]

My e-mail is Nfission @gmail.com.

 

[NFission]

Have you already found your supplier?

 

[slwong18]

Hi Gismo,

Is this quotation still open? If yes, please let us know at sl.wong@prototree.com. You can submit drawing/3D file to our website (www.prototree.com) for free quotation. Thanks.

BR
/SL Wong
Sales Manager
Prototree LLC
website: www.prototree.com
email: sl.wong@prototree.com