Request For Quote- Single peice turned ACME rod (Simple)

[milhead]

Hi Folks;

I need a simple single threaded rod turned down to 0.25" on both ends with
a larger shoulder on each end... I don't have the specifics now but
going from one end to the other the Appx dimensions would be

first inch, Dia 0.250
several inches, normal ACME threaded Rod
quarter-inch, Dia 0.375
last inch Dia 0.250

1) Material type

1/2 - 10 ACME Rod, Right Handed..(length about 14-16 inches)​

2) Is a material quote required or is material supplied.

Either, I can supply if necessary​

3) Quantity

1 (One)​

4) Drawings should be immediately available or necessary specs.

I can supply a technical drawing overnight​

5) Required time frame

2 weeks​

6) RFQ ending time

1/12/09​

7) Full contact information should be supplied upon first contact by email from both parties, neither should have to reply to @.com

David Lowe, milhead@gmail.com, 360-901-0966​

8) If you the RFQ poster needs help in some of the technical areas then that should be made know initially.

I am not a machinist, The rod is for a DIY CNC router​

9) Make known any special treatments/finishes not necessarily related to the machining process.

None​

 

[Centerline MFG.]

Message Sent

PM sent with quote and leadtime.

Chris
Centerline Manufacturing