Request For Quote- Stainless Steel Clean-Outs

Status
Not open for further replies.
Material: Schedule 40, 1-1/2", Type 304 Stainless Steel Pipe.
Quantity: 75
Description: Thirty degree lateral clean-out fitting constructed of T-304 S/S as per available sketch. This is a pressure/flow component and the weld must be treated as such and kept as small as possible to minimize distortion. Finished product must be straight. Linear tolerances plus or minus 1/16", angular tolerances plus or minus 2 degrees. Furnish and install threaded S/S cap with pipe dope for pressure integrity. The completed unit is 22" long with a 7-5/8" branch.

Sketches in ACAD 2004, .bmp or .wmf format are available on request. I can be reached at 864-839-9314 or at gannonwelding@bellsouth for questions etc.
 
Status
Not open for further replies.
Top