Request For Quote- stamping of thin SS plates

Discussion in 'Fabrication' started by cmm007, Jan 25, 2010.

Thread Status:
Not open for further replies.
  1. cmm007

    cmm007
    New Member
    Hello,

    I need a quote for two different sized stamped plates. Both have the same design. One being 14"x42" and the other would be 20"X80". Material is 304 stainless and is 0.013" thick. Quantities needed would be 250 of the smaller plate and 2000 of the larger plates (with continuing future orders).
    Let me know if you are interested and I will send you CAD drawings so we may start discussions.

    Thank you
     
  2. Sent PM

    please send to my e mail as noted.
     
  3. jasontambo

    jasontambo
    New Member
    10
    0
    0
    USA
  4. Wonderfulsz

    Wonderfulsz
    New Member
    4
    0
    0
    china
    Would you pls send the drawing to sales@wdfhk.com.
    In addition, 14''*42'',14'' refer to the ID and 42'' refer to the OD, right?
    Thanks!
     
  5. hellcreig

    hellcreig
    New Member
    Years ago we had a bare D8H block sent to a machine shop, and inserts installed to repair the counterbores. It wasn't too many years later the problem came back for whatever reason. I remember that Cat had a larger 2-step insert that actually went out into the stud holes, so there ended being notches re-machined for the studs. Those blocks,got pretty hard to find. There was a case of someone who actually machined the deck of a block down to the correct height for a spacer plate, before realizing it would not work.
     
  6. For such big part like 20"X80" with 0.013" thick material, the flatness won't be so good enough, can you send us detailed CAD drawing for our study?


    Thank you and have a nice day!

    Best regards.

    Bruce Luo
    Sales Director
    H&T Metal Products Limited.
    Tel:86-769-87198250
    Fax:86-769-87198251
    Mobile:86-13829291459,
    Skype:bruce_luo88
    Web:www.htmetalstampings.com
    Email:bruce.luo@htmetalstampings.com
    Address:3# building,Dongshen Dadao,Xuzhen management district,zhangmutou,Dongguan,Guang dong,China.
    Post Code:523623
     
  7. pearl

    pearl
    New Member
    Dear sir
    please send me drawings of your required plates.
    we provide your requirement.

    Thanks & regards
    kalpesh

     
  8. we are the manufacturer in China, would love to quote your further inquiry .

    B/R
    Vicky
     
Thread Status:
Not open for further replies.

Share This Page