I apologize in advance for not knowing all of the proper terminology. I can make glitter on my machines, but lots of overtime at work and the wife's honey-do list keeps me out of the garage.
Here are two of about eight parts that I need to have machined. Depending on results I may have more made, or measurements will be tweaked. The other parts can be shown to prospective companies, if interested.
If everything turns out good, I will hopefully have more made in the future. But to be perfectly honest, don't plan your child's college education around this job.
But, I'd like to see how the price will scale with multiple parts. But, quote with the assumption of one offs.
Tolerances: Over all +/- .05mm, but some may not be as exact as others. Obviously, I won't complain if all of the parts measurements are spot on.
But,
Chamfers should be as shown, but exact measurements are not important on prototype.
Edges are shown with a .25mm break. This measurement should be close, but not exact.
Slot is 2mm wide and is 8mm long. (10mm from radius to radius)
Drill hole is 2mm on part2.
Finish should be smooth with no tool marks. Hopefully future production items will be anodized, but don't spend a lot of time polishing the prototype.
If your shop can handle the anodizing or has a regular outsource. I'd like to get a general swag on how much that would run me.
Please send me a message or post if your interested in quoting this part. I'll be happy to reply with any information or files.
I'll be looking to award this job in two weeks, but might be awarded faster. If you are interested in quoting, let me know so that you are not overlooked.
I'd like to get the parts back in a week or so of the bid being let. If you need more time, let me know. However, I hoping that these parts will not be too difficult.
I'd prefer to keep the work in the US, but I will entertain other countries. Just understand that preference will be given to US companies.
Thanks for your time.
Here are two of about eight parts that I need to have machined. Depending on results I may have more made, or measurements will be tweaked. The other parts can be shown to prospective companies, if interested.
If everything turns out good, I will hopefully have more made in the future. But to be perfectly honest, don't plan your child's college education around this job.
But, I'd like to see how the price will scale with multiple parts. But, quote with the assumption of one offs.
Tolerances: Over all +/- .05mm, but some may not be as exact as others. Obviously, I won't complain if all of the parts measurements are spot on.
But,
Chamfers should be as shown, but exact measurements are not important on prototype.
Edges are shown with a .25mm break. This measurement should be close, but not exact.
Slot is 2mm wide and is 8mm long. (10mm from radius to radius)
Drill hole is 2mm on part2.
Finish should be smooth with no tool marks. Hopefully future production items will be anodized, but don't spend a lot of time polishing the prototype.
If your shop can handle the anodizing or has a regular outsource. I'd like to get a general swag on how much that would run me.
Please send me a message or post if your interested in quoting this part. I'll be happy to reply with any information or files.
I'll be looking to award this job in two weeks, but might be awarded faster. If you are interested in quoting, let me know so that you are not overlooked.
I'd like to get the parts back in a week or so of the bid being let. If you need more time, let me know. However, I hoping that these parts will not be too difficult.
I'd prefer to keep the work in the US, but I will entertain other countries. Just understand that preference will be given to US companies.
Thanks for your time.
Attachments
Last edited: