I need a faceplate to be cut/machined or waterjet cut from aluminuim for a hardware controller prototype im designing for my Masters project-this may take off and become a product i will sell in small quantities.
The face plate design is in two pieces; an upper plate and a lower plate.
Preferably i would like each plate to be 4mm thick, giving a total height of 8mm. The plate itself is 220mm x 340mm.
The plate is to be a blank piece of aluminuim with 64 square button holes to be cut in an 8x8 grid formation.
Please email will(dot)luis(at)gmail(dot)com for design files if you are interested.
i have attatched an example for the time being..
Material is to be supplied by you, the initial quantity would be at least 6 top and 6 bottom plates with delivery by late july at the latest-preferably asap!
Thanks.
The face plate design is in two pieces; an upper plate and a lower plate.
Preferably i would like each plate to be 4mm thick, giving a total height of 8mm. The plate itself is 220mm x 340mm.
The plate is to be a blank piece of aluminuim with 64 square button holes to be cut in an 8x8 grid formation.
Please email will(dot)luis(at)gmail(dot)com for design files if you are interested.
i have attatched an example for the time being..
Material is to be supplied by you, the initial quantity would be at least 6 top and 6 bottom plates with delivery by late july at the latest-preferably asap!
Thanks.