This part in 1 1/2 Inch Schedule 40 Steel Pipe. There are 2 bends and both ends are NPT threaded.
I have to get a couple things in the drawing corrected.
I did not want to specify a bend radius for the bends. This will keep it open to whatever tooling people have available.
Not sure why he specified the thread length at 1.56". Anyone know if this is correct?
The important things are that there is a 5" offset and one leg is 21" long from the end to where the bend begins. All bends are in the same plane.
Need a quote for 1 prototype.
Need a quote for 100pcs.
Want quote for semi gloss black powder coat if available.
Want quote for shipping or I can have them picked up.
30 day time frame.
Thanks
Jason
I have to get a couple things in the drawing corrected.
I did not want to specify a bend radius for the bends. This will keep it open to whatever tooling people have available.
Not sure why he specified the thread length at 1.56". Anyone know if this is correct?
The important things are that there is a 5" offset and one leg is 21" long from the end to where the bend begins. All bends are in the same plane.
Need a quote for 1 prototype.
Need a quote for 100pcs.
Want quote for semi gloss black powder coat if available.
Want quote for shipping or I can have them picked up.
30 day time frame.
Thanks
Jason